Expert Answers about Forest River Cedar Creek Fifth Wheel

• Does the Factory Brake Controller in a Ram 3500 Need An Adapter to Work with EOH Brakes
• I called HydraStar who is a prominent manufacturer of electric over hydraulic brake actuators and they said the issue that you are having is caused by a compatibility error between the factory integrated brake controller and your electric over hydraulic brake actuator. Therefore, you will need to use an adapter. Please also make sure that you are in the electric over hydraulic mode if that is an option. In order to recommend the correct adapter I will need to know what electric over hydraulic...
  view full answer...


• Troubleshooting Brand New Trailer Brakes Performing Poorly
• The 10V is the absolute minimum voltage you want to see at the brake magnets, so that's worth looking into. I'd make sure that the 7-way connector on the vehicle and the trailer are both in good condition, not damaged or corroded. Make sure the wiring from the trailer connector to the magnets is in good condition, with no loose connections, no cracked wire insulation. Make sure that the ground connections at each magnet are made to clean, bare metal. There are a few other possible causes...
  view full answer...


• How To Fix Trailair Flex Air 5th Wheel Pin Box Losing Pressure
• There could be one of two places that you are loosing air from on your Trailair Flex Air 5th Wheel Pin Box. In order to determine where you will want to mix up a solution of soapy water and spray the airbag and inflation valve down while under pressure. If you see any bubbles forming then you know that is where the leak is occurring. If the leak is on the actual airbag then it will need to be replaced for which we have the Replacement Air Spring for Trailair 5th Wheel Pin Boxes part # LC432404....
  view full answer...


• Brakes With Factory Brake Controller Does Not Engage
• When you hear the buzzing sound when the brakes are applied, that sound is power going back to the brakes, or at least part of the way, let's get this issue corrected. Since you have a factory brake controller, first we need to make sure that both the 7-Way on your tow vehicle and your trailer are fully functioning. Start off by looking for any corrosion build-up that could be causing the issue on both 7-ways and clean it. Next, test the functions of the 7-Way on your tow vehicle you...
  view full answer...